Welcome to Jinan kaiming Bearing Co., Ltd 
News
You are here: Home » News

News

  • Aug
    29
    Visualizing Environmental Value of Products, Utilizing it for Developing and Supplying New Products

    Contribute to reducing annual CO2 emissions by approximately 1,400,000 tons compared to 20 years ago

  • Aug
    24
    Long-Life Work Roll Bearings for Rolling Mills

    Significantly longer service life helps cut CO2 emissions and resource consumption.NSK Ltd. (NSK; Headquarters: Tokyo, Japan; President & CEO: Toshihiro Uchiyama) has developed a line of long-life four-row sealed tapered roller bearings with water-resistant grease. These new work roll bearings for r

  • Aug
    19
    New Product: NSK LCube II Tapered Roller Bearings for EV Transmissions

    Contributes to higher fuel economy (lower power consumption).NSK Ltd. (NSK; Headquarters: Tokyo, Japan; President & CEO: Toshihiro Uchiyama) has developed a new tapered roller bearing “NSK LCube II” for use in electric vehicle (EV) transmission systems.A special process is applied to the surface of

  • Aug
    07
    Development of “High Speed Rotation Ball Bearing for Pulley”

    Corresponding to outer ring rotation 20,000min-1 with 6203 sizeNTN Corporation (hereafter, NTN) has developed a bearing for pulleys achieving to rotate at up to 20,000 min-1 (approximately 1.3 times NTN's conventional products) in outer ring rotating by optimizing the internal bearing design and str

  • Aug
    06
    Get the most out of machine tools with SKF at EMO Hannover

    Visitors will discover how to improve the performance and reliability of machine tools with SKF’s portfolio of bearing solutions at the upcoming EMO Hannover on 16–21 September 2019.Gothenburg, Sweden, 19 July 2019: On its stand at EMO, SKF will highlight the key role its innovations can play in hel

  • Aug
    02
    Tapered Roller Bearing - Koyo News

    AVAILABLE AS SINGLE OR DOUBLE ROW, IN METRIC AND INCH SIZES, THEY CAN BE PRODUCED AS EITHER TDO (ONE DOUBLE CUP AND TWO SINGLE ROW CONES) AND TDI (ONE DOUBLE CONE AND TWO SINGLE ROW CUPS).This type of bearings is designed so that the cups, cones and rollers have tapered surfaces whose apexes converg

  • Jul
    25
    NTN Participates in “TELEWORK DAYS 2019”

    Promote further utilization of telework system to achieve a work-life balanceNTN Corporation (hereafter, NTN) is promoting the development of work environments to achieve work-life balances for each employee. NTN registered on and will participate in the “TELEWORK DAYS 2019” *1 which is a social mov

  • Jul
    22
    NEEDLE ROLLER BEARINGS ARE AN ECONOMICAL ALTERNATIVE FOR APPLICATIONS REQUIRING MINIMAL SPACE TO CARRY A GIVEN LOAD AT A DESIRED SPEED.

    They can be an ideal choice because of their ability to handle a given level of speed and load capacity, yet have the smallest cross section of all roller bearing types.At JTEKT we offer an extensive range of premium quality metric and inch needle roller bearings of Koyo.· Radial Needle Roller and C

  • Jul
    16
    SKF acquires cleantech start-up company

    Acquisition of RecondOil Sweden AB, a cleantech company working with lubrication fluid and oil filtration will strengthen SKF’s lubrication offerGothenburg, 20 June 2019: SKF has acquired RecondOil Sweden AB, a Swedish cleantech start-up that has developed a chemical filtration and rejuvenation proc

  • Jul
    13
    IKO’S APPROVED APPLICATOR PROGRAM ELEVATES CONTRACTORS’ EXPERTISE

    MONTREAL (April 16, 2019) – Today, at Canada’s premier roofing exposition – ROOFTech – IKO, a global leader of residential roofing shingles and commercial waterproofing and roofing products, launched its new IKO Approved Applicator Program (IAAP) for commercial contractors. IAAP helps roofing contra

  • Jul
    11
    SKF invests SEK 450 million in deep groove ball bearing manufacturing

    Staff reductions connected to automation investments in Bari will result in restructuring costs of approximately SEK 140 million in the second quarter of 2019.Gothenburg, 19 June 2019: SKF is investing approximately SEK 450 million in improving the competitiveness of its deep groove ball bearing (DG

  • Jun
    25
    Introducing the world’s first hybrid bearing life model from SKF

    SKF has unveiled a pioneering model that, for the first time, enables the working life of hybrid bearings to be determined more realistically.00001. Gothenburg, Sweden, 19 June 2019: Called the Generalized Bearing Life Model (GBLM), its development will ensure that SKF customers and distributors cho

  • Total 10 pages  Go to Page
  • Go

CONTACT US

 Add : Room 25A23, MingZhu Commercial Building, 88th JingYi Road, JINAN, CHINA
 Phone : 0086 531 85066228
E-mail :SKFbearing@chinakmbea
ring.com

Skype : qgbearing
WhatsApp: 008618678825008 
Jinan kaiming Bearing Co., Ltd 

QUICK LINKS

PRODUCTS CATEGORY

CONTACT US

    Add : Room 25A23, MingZhu Commercial Building, 88th JingYi Road, JINAN, CHINA
    Phone :0086 531 85066228
    E-mail :SKFbearing@chinakmbearing.com
   Skype : qgbearing
   WhatsApp: 0086 18678825008 
Copyright  2018 Jinan kaiming Bearing Co., Ltd 
 Support By sdzhidian