 |
| Quantity: | |
|---|---|
Characteristics of Tandem bearing :
Two point contact bearings are single row angular contact ball bearings and therefore require significantly less space in an axial direction than double row designs. The bearings comprise solid outer rings, split inner rings and ball and cage assemblies with brass or polyamide cages. Due to the two-piece inner rings, a large number of balls can be accommodated. The halves of the inner ring are matched to the specific bearing and must not be interchanged with those of bearings of the same size. The outer ring with the ball and cage assembly can be fitted separately from the halves of the inner ring.
a=15 °7000C
a=25 °7000AC
a=40 °7000B
1) Single row angular contact ball bearing
2) Double row angular contact ball bearing
angular contact ball bearing introduction:
1. Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis.
This means that they are designed to accommodate combined loads, i. E. Simultaneously acting radial and axial loads.
2. The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle.
The contact angle α is defined as the angle between the line joining the points of cont
Double row angular contact bearings, double row angular contact ball bearings, single row angular contact ball bearingsact of the ball and the raceways in the radial plane, along which the load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.
Characteristics of Tandem bearing :
Two point contact bearings are single row angular contact ball bearings and therefore require significantly less space in an axial direction than double row designs. The bearings comprise solid outer rings, split inner rings and ball and cage assemblies with brass or polyamide cages. Due to the two-piece inner rings, a large number of balls can be accommodated. The halves of the inner ring are matched to the specific bearing and must not be interchanged with those of bearings of the same size. The outer ring with the ball and cage assembly can be fitted separately from the halves of the inner ring.
a=15 °7000C
a=25 °7000AC
a=40 °7000B
1) Single row angular contact ball bearing
2) Double row angular contact ball bearing
angular contact ball bearing introduction:
1. Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis.
This means that they are designed to accommodate combined loads, i. E. Simultaneously acting radial and axial loads.
2. The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle.
The contact angle α is defined as the angle between the line joining the points of cont
Double row angular contact bearings, double row angular contact ball bearings, single row angular contact ball bearingsact of the ball and the raceways in the radial plane, along which the load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.
