KMY BRAND high quality hot sell angular contact ball bearing 7014 ACD/P5A
Product Description
KMY BRAND high quality hot sell angular contact ball bearing 7014 ACD/P5A
1 The SKF angular contact ball bearing
The SKF range of angular contact ball bearings has been designed to meet the increasingly demanding requirements of original equipment manufacturers. These bearings have a contact angle so that they can sustain significant axial loads in one direction together with radial loads. Furthermore, since an axial component is generated when a radial load is applied, these bearings are generally used in pairs, triplex sets, quadruplex sets, or multiplex sets. NSK offers one of the most comprehensive ranges of angular contact ball bearings available.
1)Single-Row Angular Contact Ball Bearings
Since these bearings have a contact angle, they can sustain significant axial loads in one direction together with radial loads.
2)Double-Row Angular Contact Ball Bearings
This is basically a back-to-back mounting of two single-row angular contact ball bearings, but their inner and outer rings are each integrated into one
3)Four-Point Contact Ball Bearings
The inner ring is split radially into two pieces. Their design allows one bearing to sustain significant axial loads in either direction.
2 The detail information of SKF angular ball bearing 7014
1)High Quality Steel - Ultra clean steel to extend bearing life by up to 80%.
2)Advanced Grease Technology - NSK lubricants that can extend grease life and performance.
3)High Grade Balls - Quiet and smooth operation even at high speed.
4)uper Finished Raceways - Specially honed to minimise noise and improve lubricant distribution and life.
5)Contact Angle - Offered in 15, 25, 30 and 40 degree angles.
6)Cages - Available in a range of Polyamide, steel and brass cage assemblies.
| Model | d(mm) | D(mm) | B(mm) | Weight(kg) |
| 7012 | 60 | 95 | 18 | 0.5 |
3 All kinds of SKF angular contact ball bearing