Engineering machinery ball joint rod end bearing POSB10NF all kinds of rod end b

Packaging & Delivery

1. Specifications

 

2.Introduction

Bearing joints by a the outer spherical inner ring, outer ring and an inner spherical plain bearings of the special structure of the. [1] can withstand heavy loads. The articular bearing structure is simpler than the Rolling mainly by an outer spherical surface of the inner ring, outer ring and an inner sphere. Joint bearings are generally used for the lower speed of the oscillating motion (i.e., angular movement), due to the sliding surface is spherical-shaped, or in a certain angle range, the tilting movement (i.e. aligning movement), the support shaft and the shaft housing bore different heart degree is large, and still work properly.

 

Rod end bearings  types:

(1). Radial spherical plain bearings requiring maintenance.

(2). Maintenance-free spherical plain bearings.

(3). Angular contact spherical plain bearings.

(4). Spherical plain thrust bearing.

(5). Rod end bearings.

       To determine the size of the bearing, must be considered a major factor is the load, the load bearing capacity and expected life to choose a bearing type. Rod ends.

Its type according to the GB/T9161 standard can be divided into:

1). The curved rod kickoff head rod ends (type code: SQ)

2). Straight kickoff rod end bearing joints (type code: SQZ)

3). Single the lever kick-off head rod ends (type code: SQD)

4). L-within threaded assembly rod end bearings the (type codenamed: SLLB)

5). L-external thread assembly rod end bearings (type code: the SALB)

6). L-bend lever-type rod ends (type code: SLLB)

7). L-single-lever-type rod ends (type code: SQLD)

8). With cylindrical welding rod end bearings (cylindrical) (Type Code: SK)

9). With a flat base welding rod ends (square) (Type Code: SF)

10). Locking lips rod ends (type code: SLR)

 3.Product Photos 

 

• Pre：Radial Spherical Plain Bearing SA25ES
• Next：none